Powered Line Array Speaker

18'' active sub with dsp M-A2MS

18" subwoofer, 800W/1600W
Built-in Amplifier, 1500W, Class-D
Built-in processor DSP , ALLDSP from Germany

INQUIRY EMAIL

Active 18’’ Subwoofer Speaker with DSP
Model	M-A2MS
Driver	18" woofer
Power(AES/Peak)	800W/1600W
Sensitivity (1 W/m)	108dB
Rated Maximum SPL	138dB ( peak@1m)
Frequency Range	35Hz-220Hz (±3dB)
Amplifier module (Class-D)	Power: 1500W/8Ω
	Impedance: 20KΩ (balance)
	Sensitivity: 0.775V
	Distortion: <0.05%
	Damping Factor: ≥400
	Power Connector:Power Con
	Voltage: 90~120V/190~240V
DSP processor	ALLDSP from Germany
Weight:	49Kg
Dimension	58x660×520mm

A2M-SUB is a planar waveguide active speaker system specially designed for A2M low-frequency supplement. It consists of an 18-inch 100mm voice coil 220 magnetic long-stroke unit.

A2M-SUB adopts an all-aluminum suspension system, which can be stacked or suspended with A2M. There is an M20 connector on the top of the box. One or two A2Ms can be supported to a certain height through MD2. The box is made of 13-layer plywood. , The surface is treated with wear-resistant and waterproof polyurea.

A2M-SUB has a built-in 1500W digital power amplifier module for low frequency and high frequency respectively. A one-in and two-out DSP digital audio processor module is used for tone correction, and the system parameters can be adjusted through RS485 connection with a computer.

It is suitable for small mobile performances, gymnasiums, theaters, bars, banquet halls and other places.

Previous：10'' line array speaker with dsp M-A2M Next：Outdoor 12'' active speaker with dsp M-A3M

Inquiry:

Product name * :

Phone * :

E-mail * :

Message* :

Verification code* : 看不清？点击更换